Graco InSite 24T280, Инструкция по эксплуатации, Страница: 3 / 8

Installation
333276A 3
Installation
1. Shutdown Reactor system. See system manual for
instructions.
Install Cellular Module
1. Use two bolts (A) to secure cellular module (1) to
bracket. See F
IG
. 1.
2. Connect 4-pin end of cable (2) to cellular module (1)
connector.
3. Route cellular module cable (2) through wire tie (3)
to MCM (B). Secure with wire ties (4) as needed.
4. Connect other end of cellular module cable (2) to
MCM (B) connector 14.
NOTICE
To prevent damage to the Graco InSite, do not
expose to rain.
NOTICE
To prevent cracking the plastic shell of the cellular
module (1), do not overtighten bolts (A) when install-
ing onto bracket (2).
F
IG
. 1: Install Cellular Module
WLD
B
A