11. Turn the pump over and insert a ball retainer
(20), check ball (22), d-ring (21), and o-ring (17)
into the inlet side of each fluid cover (6).
12. Align the inlet manifold (10) on the assembly.
Use the placement of dowel pins (23) to orient
the manifold so the inlet port is facing the correct
direction for your application.
13. Align the inlet manifold retainers (12) on the inlet
manifold (10).
14. On each screw (29), place two belleville washers
(27), with the rounded side of first washer toward
the screw head and the rounded side of the
second washer away, then a flat #12 washer
(26). Thread each screw assembly through an
inlet manifold retainer (11) and into the fluid
covers (6), and tighten by hand for now.
15. Follow
16. Replace all bolt covers (37).
334795B
23
Springer Pumps, LLC
Telford, PA 18969
Tel: 866-777-6060 / Int'l: 215-949-2900
Fax: 866-777-6383 / Int'l: 215-721-1296
shop.springerpumps.com
