Installation
3A0138J
11
Flushing
Before installing meter or dispense valve to end of hose, flush supply line with a solvent compatible with the fluid you
are dispensing.
1.
Place end of hose in waste container.
2.
Blow out entire lubricant supply line with air.
3.
Flush equipment with a compatible solvent until fluid
runs clear.
4.
Pump dispensing lubricant through line until all sol-
vent is flushed out.
Содержание HNHB7 series
Страница 6: ...Installation 6 3A0138J Pressure Relief Procedure 1 2 ...
Страница 15: ...Adjusting Spring Tension 3A0138J 15 5 Replace one screw B Leave tool C in place 6 Remove tool C B C B C B C ...
Страница 17: ...Hose Stopper Installation 3A0138J 17 Hose Stopper Installation Installing Meter 1 2 ti13525 1 ...
Страница 25: ...Technical Data 3A0138J 25 Mounting Pattern 293 86 mm 131 76 mm 5 187 in 14 mm 1 2 in bolts 4X 11 57 in ...