Graco Fuller O'brien Paints Pro 501st 231, Инструкция-перечень запасных частей

Страница: 29 / 36

Pressure Transducer
WARNING
INJECTION HAZARD
To reduce the risk of serious injury,
whenever you are instructed to relieve
pressure, follow the
Pressure Relief
Procedure
on page 9.
NOTE:
See Fig. 32 for this procedure.
1. Remove the displacement pump. See page 20.
2. Use a pull-twist motion to remove the transducer
(29) from the pump manifold (101).
3. Clean paint residue from the hole in the manifold;
do not scratch the surface of the hole.
4. Lightly apply oil to the o-ring of the new transducer.
5. Install the transducer in the pump manifold, while
guiding the o-ring and backup into place.
6. Align the holes in the transducer as shown by the
arrows in Fig. 32.
7. Install the displacement pump. See page 20.
Fig. 32
02841A
101
29