Graco EM 238-451, Инструкция и перечень запасных частей

Страница: 7 / 20

Operation
2. If you do not want to reset the total, skip this step
by pressing the Auto button. If you want to reset
the total, press the Reset button.
A resettable total of 00000 GAL or 00000 LITERS
is shown on the display.
If you press the Reset button again, the display
returns to the previous total. Whatever is
displayed is locked in when you press the Auto
button.
3. Press the Auto button.
The presently selected units of measurement
blinks. It will be one of the following:
QTS, GAL, LITERS, or PTS, as shown below.
QTS
LITERS
PTS
GAL
4. If you do not want to change the unit of
measurement, skip this step by pressing the Auto
button. If you want to change the unit of
measurement, press the Reset button.
Each time you press the Reset button, the display
scrolls to the next unit of measurement.
NOTE: You do not need to change the calibration
for the different units of measurement.
5. Press the Auto button with your choice of the units
of measurement blinking.
The auto preset amount blinks, and the unit of
measurement quits blinking.
6. If you do not want to change the auto preset
amount, skip this step by pressing the Auto button.
If you want to change the auto preset amount, do
the following:
6a. Press the Reset button.
The amount shown on the display is cleared.
6b. Press the 10 button to change the 10s digit,
press the 1.0 button to change the 1s digit,
and press the 0.1 button the change the first
decimal digit.
In the figure below, the arrows point from the
numbered buttons on the keypad to the
corresponding digits in the display.
15.000
AUTO
GAL
NOTE: If you press and hold the 10, 1.0, or
0.1 buttons, the digits advance rapidly.