Technical Specifications
3A6165J
67
Technical Specifications
EFR
US
Metric
Maximum fluid working pressure
‡
3500 psi
24 MPa, 241 bar
Maximum fluid temperature
120°F
50°C
Fluid circulation ports
1/4 NPS(m)
Line voltage rating
200-240V, 1ph, 50/60 Hz
400-480V, 1ph, 50/60 Hz
Wetted parts
Stainless steel, zinc-plated carbon steel, brass, tungsten
carbide, chrome, fluoroelastomer, PTFE, ultra-high molec
-
ular weight polyethylene, silicon nitride
Weight (not including supply pumps)
240V systems
320 lbs
145 kg
480V systems
401 lbs
182 kg
Full load amperage
240V systems
20A
480V systems
10A
Fluid inlet pressure at inlet fitting
Pump Inlet
70 - 2000 psi
0.48 - 13.8 MPa, 4.8 - 138
bar
Fluid Inlets
Component A
3/4 npt(f)
Component B
3/4 npt(f)
Fluid Outlets on Manifolds
Component A
1/2 npt(f)
Component B
1/2 npt(f)
Notes
‡ The maximum fluid working pressure for the base machine without hoses is 3500 psi (24.1 MPa,
241 bar). If hoses, valves or accessories rated at less than 3500 psi are installed, the system maxi
-
mum fluid working pressure becomes the rating of the hoses. The minimum pressure rating for hoses
is 2000 psi. Do not install hoses with a pressure rating lower than 2000 psi.
All other brand names or marks are used for identification purposes and are trademarks of their
respective owners.
Performance
Combined Displacement
(A Pump + B Pump)
Min Shot Size
Min Output
Flow
Max Output Flow
(20 cycles/min max)
*
Max Average Outlet
Pressure
‡
**
60 cc
0.3 cc
20 cc/min
1,200 cc/min
3,500 psi (241 bar)
80 cc
0.3 cc
20 cc/min
1,600 cc/min
3,500 psi (241 bar)
100 cc
0.3 cc
20 cc/min
2,000 cc/min
3,500 psi (241 bar)
120 cc
0.3 cc
20 cc/min
2,400 cc/min
3,500 psi (241 bar)
140 cc
0.3 cc
20 cc/min
2,800 cc/min
3,400 psi (235 bar)
160 cc
0.3 cc
20 cc/min
3,200 cc/min
3,000 psi (207 bar)
* Flow may be limited by the amount of pressure generated when using thick materials or with high restriction.
** High inlet pressures reduce this value, subtract 2x inlet pressure.
