Graco E-flo iQ 26B543, Инсталляционные компоненты

Страница: 42 / 80

Maintenance
42 3A8217A
Reinstall Platen Wipers
1. Using a wooden or plastic tool to prevent damage to
the Wiper (EB), clean all material from the seal
grooves.
2. Working from the bottom , angle one Wiper (EB)
over the back of the Platen (AD). See F
IG
. 34.
3. Insert the Wiper (EB) in the top groove and run the
front of the Wiper into the groove.
4. If using a 55 gallon Platen, insert the second Wiper
(EB) in the lower groove and run the front of the
Wiper into the groove.
5. Lubricate the outside of the Wiper with lubricant
compatible with the material being pumped. Check
with the material supplier.
Recycling and Disposal
End of Product Life
At the end of the product’s useful life, dismantle and
recycle it in a responsible manner.
• Perform the Pressure Relief Procedure .
• Drain and dispose of fluids according to applicable
regulations. Refer to the material manufacturer’s
Safety Data Sheet.
• Remove motors, batteries, circuit boards, LCDs
(liquid crystal displays), and other electronic
components. Recycle according to applicable
regulations.
• Do not dispose of batteries or electronic
components with household or commercial waste.
• Deliver remaining product to a recycling facility.
F
IG
. 34
TI10614A
EB
55 Gallon Platen