Warnings
2
307107P
Warnings
WARNING
WARNING
WARNING
WARNING
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
• This equipment is for professional use only.
• Read all instruction manuals, tags, and labels before operating the equipment.
• Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
• Do not alter or modify this equipment.
• Check equipment daily. Repair or replace worn or damaged parts immediately.
• Do not exceed the maximum inlet pressure of the lowest rated system component. The maximum
inlet pressure of this equipment is 300 psi (2.1 MPa, 21 bar).
• Follow the
Pressure Relief Procedure
on page 4 if the spray tip clogs and before cleaning, checking
or servicing the equipment.
• Do not stop or deflect leaks with your hand, body, glove or rag.
• Be sure all equipment safety devices are operating properly before each use.
• Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the
Technical Data
section of all equipment manuals. Read the fluid and solvent manufacturer’s
warnings.
• Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and
solvent manufacturer.
• Wear hearing protection when operating this equipment.
• Comply with all applicable local, state, and national fire, electrical, and safety regulations.
