Graco DynaMite 25D100, Инструкция - Каталог запасных частей, Страница: 3 / 24

Related Manuals
3A5311D 3
Related Manuals
Part Numbers
Overview
The Tandem Heavy Duty DynaMite Supply System is
designed to provide continuous dispensing of material
by having two DynaMite 190 Extruders supplying mate
rial to the same dispensing equipment. This method
avoids having to interrupt production when replacing a
pail of material.
Only one supply pump is active at a time. The system
automatically starts the non-active supply pump when
the active supply pump is done dispensing material.
This enables the operator to replace the pail of material
for the pump that just completed dispensing while the
other pump continues to dispense material.
This process is controlled by a switch on each supply
pump that is triggered when the pump reaches its low
limit. When the system stops that pump from dispensing
and actuates the other pump, the light tower signals the
operator that it is time to replace the pail of material.
Manuals
Part
Description
308302 DynaMite
™
190 Extruder Instructions - Parts
3A3442 NXT Air Motor Repair and Parts Manual
Part No.
Maximum Fluid
Working Pressure
Description
25D100 1200 psi (8.3 MPa, 83 bar)
Tandem Heavy Duty DynaMite Supply System with hoses, 5/8 x
120-outlet - Approved
25R495 1200 psi (8.3 MPa, 83 bar)
Tandem Heavy Duty DynaMite Supply System with hoses, 3/4 x
120-outlet - Approved