Graco Dura-Flo 25A451, Операция и комплектующие

Страница: 8 / 20

Installation
8 3A4100D
Installation
1. Remove the air motor and pump from the system.
See the system manual for instructions.
2. Assemble ground wire (HH) to the ground screw
location on the air motor (F).
3. Remove the 45° 1 in. NPT fitting and replace it with
elbow (BB) and swivel (6) as needed. Assemble
with pipe sealant.
4. Install mounts (3) and gaskets (4). Torque to 15-18
ft-lb (20-24 N•m).
5. Install air motor (F) onto the system. See system
manual for further instructions.
NOTE: For Uni-Drum
™
systems, position the left and
right pumps as shown below.
Keep hands and fingers away from the follower plate,
pump inlets, and the drum when raising and lowering
the follower plate to reduce the risk of pinching or
amputating hands or fingers.
WLD
%%
++
WLD
/()73803
5,*+73803