Tighten
EZ LATCH
™
by pushing down hard
on car seat and pulling the adjustment belt
(Fig. d)
.
Test car seat for secure installation as
described in car seat instruction manual by
pulling front-to-back and left-to-right.
Check that the
EZ LATCH
™
stays tight and
does not slip from the tightened position.
If it does not stay tight, try another seating
position or contact Customer Service.
For forward-facing car seats only, attach the
top tether strap and tighten top tether strap.
Forward-facing car seats
SHOULD
use a top
tether strap in addition to
EZ LATCH
™
.
If you do not have a top tether strap, call
1-888-224-6549 with your model number
and date of manufacture to see if a top tether
strap is available for your model.
Each trip check that car seat is securely
installed; tighten if necessary.
❃
Installing Car Seat In Vehicle
Follow instruction manual provided with
car seat for installation in vehicle;
use the
EZ LATCH
™
in place of the vehicle seat belt.
For ease of installation, extend
EZ LATCH
™
to its maximum length.
Position car seat, rear-facing or
forward-facing, correctly for your child
(Fig. a or Fig. b).
IMPORTANT: Release Buttons
must face up
and
Adjuster
must face outward so belt can
be adjusted without interference
(Fig. a)
.
Thread
EZ LATCH
™
through car seat belt
path normally used for vehicle seat belt, as
shown in car seat manual.
Belt must lay flat and not be twisted.
Hook
Connectors
to vehicle lower anchors.
Pull firmly on
Connectors
to be sure they are
attached
(Fig. c)
.
5
1
2
4
5
6
7
8
3
Содержание Carseat
Страница 11: ...Graco Children s Products Inc A Division of Newell Rubbermaid P O Box 100 Elverson PA 19520...
Страница 22: ...Graco Children s Products Inc A Division of Newell Rubbermaid P O Box 100 Elverson PA 19520...
Страница 33: ...Graco Children s Products Inc Una divisi n de Newell Rubbermaid P O Box 100 Elverson PA 19520 EE UU...