3.5 Attaching Canopy (on certain models)
1. Infant restraint comes with four (two
on certain models) identical canopy
support parts.
Thread one canopy support completely
through one sewn tunnel
!
.
2. Slide straight end of a second
support into the straight end of the
first support
"
.
3. On models with four canopy supports, repeat
steps one and two for the other canopy tunnel.
The canopy should appear as shown
#
.
4. Attach canopy in the areas between the
infant restraint and the handle base
$
.
!
"
#
$
14
To remove canopy:
Pull the canopy fabric back.
With both thumbs on the
center of the canopy bow,
wiggle back and forth while
pulling out on the two parts
of the canopy bow
%
.
%
