Graco 482 Series, Инструкция-перечень запасных частей

Страница: 4 / 24

4 310543
WARNING
INJECTION HAZARD
Spray from the metering valve, hose leaks, or ruptured components can inject fluid into your body
and cause extremely serious injury, including the need for amputation. Splashing fluid in the eyes
or on the skin can also cause serious injury.
Fluid injected into the skin might look like just a cut, but it is a serious injury.
Get immediate
medical attention.
Do not point the gun/valve at anyone or at any part of the body.
Do not put your hand or fingers over the spray tip/nozzle.
Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
Always have the trigger guard on the gun when dispensing.
Check the gun diffuser operation weekly. Refer to the gun manual.
Be sure the gun/valve trigger safety operates before dispensing.
Lock the gun/valve trigger safety when you stop dispensing.
Follow the Pressure Relief Procedure on page 7 if the nozzle clogs, and before cleaning,
checking or servicing the equipment.
Tighten all fluid connections before operating the equipment.
Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immedi-
ately. Do not repair high pressure couplings; you must replace the entire hose.
Fluid hoses must have spring guards on both ends, to help protect them from rupture caused by
kinks or bends near the couplings.