Graco 309489D, Инструкция по эксплуатации

Страница: 4 / 20

4 309489
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re-
sult in a fire or explosion and serious injury.
D
Ground the equipment and the object being sprayed. Refer to Grounding on page 5.
D
If there is any static sparking or you feel an electric shock while using this equipment, stop spray-
ing immediately. Do not use the equipment until you identify and correct the problem.
D
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
D
Keep the spray area free of debris, including solvent, rags, and gasoline.
D
Before operating this equipment, electrically disconnect all equipment in the spray area.
D
Before operating this equipment, extinguish all open flames or pilot lights in the spray area.
D
Do not smoke in the spray area.
D
Do not turn on or off any light switch in the spray area while spraying or while operating if fumes
are present.
D
Do not operate a gasoline engine in the spray area.
D
Never use 1,1,1--trichloroethane, methylene chloride, other halogenated hydrocarbon solvents, or
fluids containing such solvents in this equipment. Such use could result in a serious chemical
reaction, with the possibility of explosion, which could cause death, serious injury, and/or substan-
tial property damage.
Consult your fluid suppliers to ensure that fluids being used are compatible with aluminum and zinc
parts.
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin,
inhaled, or swallowed.
D
Know the specific hazards of the fluid you are using.
D
Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,
state and national guidelines.
D
Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and
solvent manufacturer.