![background image](http://html1.mh-extra.com/html/graco/307133p/307133p_instructions-parts-list-manual_2253132004.webp)
4
307133
Installation
Grounding
WARNING
FIRE AND EXPLOSION HAZARD
Before operating the pump, ground the
system as explained below. Also read
the section FIRE AND EXPLOSION
HAZARD on page 3.
1.
Pump: connect the ground wire (A) firmly to a
metal part of the tank such as the base of the
carry handle (B). Connect the other end of the wire
to a true earth ground. See Fig. 1. Order Part No.
237569 Ground Wire and Clamp.
2.
Air compressor: according to the manufacturer’s
recommendations.
3.
Object being sprayed: according to local code.
4.
All solvent pails used when flushing, according to
local code. Use only metal pails, which are con-
ductive. Do not place the pail on a non-conductive
surface, such as paper or cardboard, which inter-
rupts the grounding continuity.
5.
To maintain grounding continuity when flushing or
relieving pressure, always hold a metal part of the
gun firmly to the side of a grounded metal pail,
then trigger the gun.
Fig. 1
A
B
7856