![background image](http://html1.mh-extra.com/html/graco/25p471/25p471_operation-repair-parts_2251627014.webp)
Operation
14
3A7398A
3. Turn the Cutter Height Control Knobs
counterclockwise about two turns to ensure the
cutter head or heads do not contact the work
surface.
4. For the initial adjustment, fold the debris skirt
upwards and tape it to the frame. This allows
viewing the cutters when setting the height.
5. Begin adjusting the head or heads downward. Using
a piece of thick paper, adjust until the head or heads
are touching the paper evenly on all sides.
6. Turn the Cutter Height Control Knobs clockwise
about two turns so the cutters touch the work
surface with a slight force.
Disconnect GrindLazer from
Skid Steer
The following instructions are generic. Due to the
differences in attachment mounting and removal
methods among various brands of skid steers, refer to
your skid steer owners manual for proper attachment
removal methods.
1. Set skid steer parking brake.
2.
Hydraulic Models (25P471 & 25P472)
:
Turn off
auxiliary circuit and place GrindLazer on the work
surface.
Gas Model (25P473)
: Turn off engine and place the
GrindLazer on the work surface.
3.
Hydraulic Models (25P471 & 25P472)
:
Release
hydraulic pressure in hoses, and disconnect
auxiliary hoses.
4. Release the skid steer lock pins.
5. Start skid steer engine and detach Universal Quick
Attach Mount Plate.