Graco 25M404, Инструкция по эксплуатации

Страница: 30 / 32

Technical Specifications
30 3A6711C
Technical Specifications
SDM8 and SDM18 Metered Dispense Valve
US Metric
Flow range* 0.25 to 18 gpm 0.9 to 68 lpm
*Tested in 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity.
Maximum Working Pressure 1500 psi 103.4 bar
Units of Measure (factory set to
quarts) pints, quarts, gallons liters
Weight 5.3 lb 2.4 kg
Dimensions (without extension)
Length 13 in. 33 cm
Width 3.75 in. 9.5 cm
Height 5.75 in. 14.6 cm
Units of measure (factory set in
quarts) maximum recorded dispensed volume = 9999 units
Inlet 1/2-14 npt or 3/4-14 npt
1/2 BSPP/BSPT or 3/4BSPP/BSPT
Outlet 3/4-16 straight thread o-ring boss
Operating temperature range 4 °F to 158°F -16°C to 70°C
Storage temperature range -40°F to 158°F -40°C to 70°C
Battery** 4AA alkaline batteries
**Recommended battery: Energizer
®
Alkaline E91 .
Wetted parts aluminum, stainless steel, PBT, nitrile rubber, zinc plated carbon
steel, nickel plated carbon steel
Fluid compatibility antifreeze, gear oil, crankcase oil, ATF, windshield washer fluid
(up to 50% alcohol-based solutions)
Metered Dispense Valve Accuracy† +/- 0.5 percent
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10-weight oil and 1 gallon dispensed. May require calibra-
tion.
California Proposition 65
WARNING: This product can expose you to chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65warnings.ca.gov.