Intelligent Paint Kitchen Overview
Variable
Variable
Variable Frequency
Frequency
Frequency Drive/Inverter
Drive/Inverter
Drive/Inverter (B)
(B)
(B)
17N041,
17N041,
17N041, 17N042,
17N042,
17N042, 17N043
17N043
17N043
The Variable Frequency Drive/Inverter (B) controls
the speed of an AC electric agitator. Suitable
Variable Frequency Drives/Inverters may be obtained
from Graco or from a variety of manufacturers.
Supported Variable Frequency Drive/Inverter
manufacturers include Lenze SMVector and Allen
Bradley PowerFlex 4M.
Model
Model
Model
Input
Input
Input
Output
Output
Output
HP
HP
HP
17N041
120–240 VAC
(single phase)
240 VAC
(three phase)
1
17N042
208–240 VAC
(single or three
phase)
208–240 VAC
(three phase)
1
17N043
380–480 VAC
(three phase)
380–480 VAC
(three phase)
1
One Variable Frequency Drive/Inverter is needed
for each electric agitator in the system. Software
installed in each Variable Frequency Drive/Inverter
allows communication between each Variable
Frequency Drive/Inverter and the Supervisor Box
(A). Warnings, installation, and operation details
are contained in the provided Variable Frequency
Drive/Inverter manual.
Variable Frequency Drives/Inverters are not
approved for use in hazardous locations. They must
be installed in the non-hazardous location of the
Intelligent Paint Kitchen. For complete warnings and
operation instructions, see the Variable Frequency
Drives manual 3A4793.
Figure 9 Variable Frequency Drive/Inverter
16
3A4030C