Repair
334644C
15
Reassemble the Air Valve
1.
Lubricate detent cam (104) and install into housing.
2.
The piston (102) and u-cup seals (108) come
pre-assembled. Lubricate the u-cup seals (108) on
both ends of the piston (102) and install it in the
housing.
3.
Lubricate and install the detent assembly (103) into
the piston, with the beveled center toward the detent
cam.
4.
Lubricate and install new o-ring (106) on bottom end
cap (107). Lubricate and install new o-ring (119)
and runaway reset button (118) on top end cap
(117). Install the end caps (107, 117) into the hous-
ing.
5.
Install a snap ring (110) on each end to hold end
caps in place.
6.
Install the spring (111).
7.
Lubricate and install the cup o-ring (123) on the cup
body (113), then assemble the cup body to the cup
base (112c). Lubricate and install the cup assembly.
Align the small round magnet with the air inlet.
8.
Install the valve plate (105). Lightly tighten the
screws (109) to hold it in place.
