Graco 24L096, Инструкция по эксплуатации

Страница: 13 / 22

Appendix A - Control Drawing 16M169
Appendix Appendix Appendix A A A --- Control Control Control Drawing Drawing Drawing 16M169 16M169 16M169
9902471 9902471
9902471
Class Class
Class
I ,,, Div. Div.
Div.
1, 1,
1,
Group Group
Group D
D
D T3
T3
T3
Ex Ex
Ex ia
ia
ia [ia]
[ia]
[ia]
Ta=0°C Ta=0°C
Ta=0°C to
to
to 50°C
50°C
50°C
Ex Ex Ex ia ia ia [ia] [ia] [ia] op op op is is is II A A A T3 T3 T3 Ga Ga Ga
IECEx IECEx IECEx ITS ITS ITS 18.0023X 18.0023X 18.0023X
Ta=0°C Ta=0°C
Ta=0°C to
to
to 50°C
50°C
50°C
2575 2575 2575
GRACO GRACO
GRACO INC
INC
INC
P.O. P.O. P.O. Box Box Box 1441 1441 1441
Minneapolis, Minneapolis, Minneapolis, MN MN MN 55440 55440 55440
U.S.A. U.S.A. U.S.A.
NOTES:
1. The non-intrinsically safe terminals (power rail)
must not be connected to any device which uses or
generates more than Um=250 Vrms or DC unless
it has been determined that the voltage has been
adequately isolated.
2. Installation should be in accordance with ANSI/ISA
RP12.06.01 “Installation of Intrinsically Safe Systems
for Hazardous (Classified) Locations” and the National
Electrical Code® (ANSI/NFPA 70).
3. Installation in Canada should be in accordance with
the Canadian Electrical Code, CSA C22.1, Part 1,
Appendix F.
4. For ATEX, install per EN 60079–14 and applicable
local and national codes.
5. Multiple earthing of components is allowed only if a
high integrity equipotential system is realized between
the points of bonding.
6. Do not remove any cover until power has been
removed.
7. Lithium clock cell: Manufacturer: Panasonic; Part
Number: CR2032; No orientation restrictions.
8. For installation, maintenance or operation instructions,
see instruction manual.
Warning: Substitution of components may impair intrinsic
safety.
Avertissement: La substitution de composants peut
compromettre la securite intrinseque.
332013E 13