Technical Specifications
28
312668ZAC
Technical Specifications
LDP5 (Preset) Electronic Metered Dispense Valves
US
Metric
Flow range*
0.1 to 5 gpm
0.4 to 19 lpm
Maximum Working Pressure
1000 psi
6.89 MPa, 68.9 bar
Operating temperature range
55°F to 120°F
12.8°C to 49°C
Storage temperature range
-30°F to 120°F
-34°C to 49°C
Inlet/Outlet Sizes
Inlet size
1/2 npt, 1/2 bspp, 1/2 bspt
Outlet size
3/8 npt
Fluid Compatibility
lubricating oils, antifreeze mixtures
Dimensions without extension/nozzle
Length
11 in.
28 cm
Width
3.25 in.
8.3 cm
Height
3.25 in.
8.3 cm
Wetted parts
Stainless steel, nitrile rubber, zinc, CS, LCP
Battery**
9 volt alkaline
Pressure loss at 5 gpm†
90 psi
0.62 MPa, 6.2 bar
Accuracy
+/- 0.5 percent
Units of Measurement (pints, quarts, gallons, liters (factory set to quarts)
Maximum totalizer amount
99,999 units
Maximum recorded dispensed volume
999.99 units
Maximum preset volume
999.9 units
Weight
All models
3 lb.
1.36 kg
Notes
*Tested in No. 10W motor oil. Flow rates vary with fluid pressure, temperature, and viscosity.
**Battery required to meet safety approvals: Duracel
®
MN1604
†At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10W motor oil and 1 gal. (3.8 l) dispensed. May require
calibration; out of box accuracy is +/- 1.25 percent.
Duracel
®
is a registered trademark of Duracell Inc.
All other brand names or marks are used for identification purposes are trademarks of their respective
owners.
