Graco 24F789, Инструкция по эксплуатации, Страница: 9 / 12

Instructions
313939E 9
2. Connect hose fitting (m) to swivel assembly. (F
IG
.
18).
3. Rewind hose back onto spool.
4. Reinstall ball stop (r) on hose and hand tighten
screws (n) and nuts (p) to hold ball stop securely in
place (F
IG
. 16).
NOTE: It may be necessary to reposition ball stop
after hose reel is installed and back in service.
5. Continue reassembly instructions following Swivel
Replacement Instructions, Step 2, page 9.
Swivel Replacement Reassembly
1. Turn hose reel assembly over. Connect hose fitting
(m) to swivel assembly. (F
IG
. 19).
Continue Hose Replacement Installation
Instructions Here
2. Replace side enclosure (j) over spool using new
screws (1) (F
IG
. 20). Torque to 0.07 - 0.1 N.m (10 -
15 in. pounds).
3. Hold spool and cover (j) together and turn the hose
reel assembly over. Insert a torque wrench over cap
(2) and Torque to 0.28 - 0.35 N.m (40 - 50 in. lbs).
F
IG
. 18
F
IG
. 19
m
m
F
IG
. 20
F
IG
. 21
1
j
2