Instructions
4
313939E
Instructions
Disassembly
1.
Relieve the pressure
(page
3).
NOTE:
If necessary, spring tension can be released
after
the hose reel is removed from the mounting
bracket. To remove the hose reel from the mounting
bracket, first do Steps 3 - 6 (page 6). Then release
spring tension following the instructions provided in Step
2 (a-c).
2.
To release spring tension (F
IG
. 3):
a.
Insert a ratchet over the spring adjustment nut.
Turn nut 1/8 turn clockwise.
b.
Push in on ratchet. Grasp handle firmly with
both hands; then turn and ratchet counter-clock-
wise, 1/4 turn ONLY (F
. 4).
Re-engage the spring adjustment nut by allow-
ing it to move outward while rotating it coun-
ter-clockwise and reposition the ratchet.
IMPACT HAZARD
The spring is always under great tension and could be propelled or uncoil with enough force to cause serious
injury.
•
The hose reel spring is not a serviceable part. Do not attempt to replace or service the spring.
•
Always grasp ratchet handle firmly with both hands when adjusting tension.
•
When decreasing spring tension, never attempt to turn ratchet more than 1/4 turn with each push-in motion.
Uncontrolled spinning of the hose reel could cause serious injury if you are hit by the hose or a tool.
•
Never allow reel to spin freely.
•
The reel must be bolted securely in place when making adjustments.
F
IG
. 3
ti13516
1/8
Turn
F
IG
. 4
ti13517
Push In
1/4
Turn
Only