Motor Replacement
3A1181B
27
Motor Replacement
See Wiring Diagram, page 28.
Removal
1.
Relieve pressure, page 7
. Disconnect power cord
from outlet.
2.
Hi-Boy Models Only -
Disconnect high-pressure
hose at pump outlet (
see page 13
).
3.
Remove pump,
Displacement Pump Replace-
ment, page 13
.
4.
Remove drive housing,
Drive Housing Replace-
ment, page 15
.
5.
Remove control board,
Control Board Replace-
ment, page 19
.
6.
Remove two screws (4) and filter manifold (43).
7.
Remove green ground screw (20) and ground wire
(G) from motor endbell.
8.
Remove cover (14). Remove four screws (4) and
motor (57) from frame (1).
Installation
1.
Install cover (14) on motor (57). Install motor on
frame (1) with four screws (4).
2.
Connect green ground wire (G) to frame with green
ground screw (20). Be sure green ground wire ter-
minal faces up or wires could get caught in shroud.
(
see illustration, page 25.
)
3.
Install manifold (43) with two screws (4).
4.
Install control board,
Control Board Replacement
,
page 19
5.
Install drive housing.
Drive Housing Replacement
,
page 15
6.
Install pump.
Displacement Pump Replacement
,
page 13
NOTICE
Do not drop gear cluster (27) and (26) when remov-
ing drive housing (29). Gear cluster may stay
engaged in motor front end bell or drive housing.
4
18
43
4
11
57
1
Liberally apply grease
1
ti16092a
1
G
20
26
27
14
Содержание 24F561
Страница 29: ...Notes 3A1181B 29 Notes...
Страница 39: ...Notes 3A1181B 39 Notes...