Component Identification
12
309524V
Fluid Connections &
Accessories
1.
Install a fluid shutoff valve (T) in the heater’s 1/2-14
npt(m) fluid inlet; do not overtighten. Connect the
fluid line to the valve.
2.
Provide a means for adequately handling fluid
expansion caused by heat. Options include:
-
Use flexible hoses between heater and gun.
-
Install a properly sized accumulator down-
stream from the heater.
-
Install a pressure relief valve (X) pre-set to
relieve pressure when it exceeds the system
maximum working pressure.
3.
Install a fluid filter (L), drain valve (M), and fluid
pressure regulator (N) near the heater’s 1/2-14
npt(f) fluid outlet. Then connect the fluid line.
To prevent serious injury caused by component or
equipment rupture:
•
Never install a shutoff device between the heater
and gun as this will trap the heated fluid and not
allow for expansion.
•
Never use a fluid regulator as a shutoff device if it
is installed between the heater and gun
•
Provide a means for adequately handling fluid
expansion caused by heat.
F
IG
. 8: Fluid Connections & Accessories
05545-524
T
X
N
L
M