8
309368
1
.
Check the oil level of the engine and pump.
Startup
Always use this startup procedure to ensure that the pressure washer is started safely and properly.
D
Always engage the gun trigger safety latch when you stop spraying. This reduces the risk of fluid
injection or splashing in the eyes or on the skin if the gun is bumped or triggered accidentally.
D
Always observe the CAUTIONS in this section to avoid costly damage to the pressure washer.
D
If you use the Sandblaster Kit, see the Sandblaster Kit Manual for detailed cleaning information.
.
Operation
NOTE:
All Honda engine powered pressure washers are equipped with an engine low-oil sensor that shuts the
engine off if the oil level falls below a certain level. If the engine stops unexpectedly, check the oil and the fuel
levels. Check the oil level each time you add fuel.
Oil level
FIRE HAZARD
Do not refuel a hot engine. Refueling a hot engine could cause a fire. Use only fresh, clean,
regular or unleaded gasoline. Close the fuel shutoff valve during refueling.
WARNING
2. Check fuel level.
Fuel level
3
.
Check oil level in pump. It should be half way up the sight
glass located on the front of the pump. Add pump oil as
necessary. The system is equipped with a thermal over-
load to help prevent severe damage.
Oil level
NOTE:
It is important to drain and refill the pump oil after the first 50 hours of operation.
Содержание 244811
Страница 22: ...22 309368 Notes...