Graco 241105, Инструкция-перечень запасных частей

Страница: 5 / 8

Operation
308943E 5
Operation
Caster Wheel Alignment
(See letter call-outs in Parts drawing on Page 5.)
1. Loosen bolt (D).
2. Push line striper forward following a straight
reference line.
3. Stop.
4. Tighten bolt (D).
Continuous Radius Striping
1. Push line striper around radius
2. Stop.
3. Tighten knob (E).
4. Verify accuracy, then paint.
Swivel Hub Bearing (G) Adjustment
1. To swivel less freely, tighten nut (A). 2. To swivel more freely, loosen nut (A).
Operation
Caster Wheel
(See letter call-outs in Parts drawing on Page 5.)
1. Once each year, tighten nut (A) until spring washer
bottoms out. Then back off the nut 1/2 to 3/4 turn.
2. Once each year, tighten nut (B) until it begins to
compress spring washer. Then tighten the nut an
additional 1/4 turn.
3. Once each month, grease the wheel bearing (F).
4. Check pin (C) for wear. If pin is worn out, there will
be play in the caster wheel. Reverse or replace the
pin as needed.