background image

16

308-460

Technical Data

Maximum Fluid Working Pressure

3000 psi (210 bar)

. . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum Air Operating Pressure

100 psi (6.9 bar)

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Pump Air Consumption

 

free flow: 20 scfm at 100 psi (0.56 m

3

/min at 6.9 bar)

. . . 

Gun Air Consumption

 5 scfm at 30 psi (0.14 m

3

/min at 2.1 bar)

. . . . . . . . . . . . . . . 

Wetted Parts

Pump

304/316/420/17–pH stainless steel, chrome plating,

. . . . . . . . . . . 

tungsten carbide, PTFE, 

leather, UHMWPE

Gun

303 stainless steel, carbide, UHMWPE CV75,

. . . . . . . . . . . . . . . . . . . 

polyethylene, PTFE, Delrin

Fluid filter

303/304/316 stainless steel, polyethylene, PTFE

. . . . . . . . . . . 

Fluid fittings

304/316 stainless steel

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Fluid hose

 nylon

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

NOTE: all 304, 316 and 17–4 pH SST are electropolished and/or passivated.
Delrin

   

 is a 

    registered trademark of the Du Pont Company

.

The Graco Warranty and Disclaimers

WARRANTY

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in fluid and workmanship on the date of
sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty, Graco
will, for a period of twelve months from the date of sale, repair or replace any part of the equipment proven defective. This warranty
applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installation, misap-
plication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco
component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of
structures, accessories, equipment or fluids not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or fluids not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment
will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in fluid or
workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.

DISCLAIMERS AND LIMITATIONS

The terms of this warranty constitute purchaser’s sole and exclusive remedy and are in lieu of any other warranties (express or
implied), including warranty of merchantability or warranty of fitness for a particular purpose, and of any non–contractual liabili-
ties, including product liabilities, based on negligence or strict liability. Every form of liability for direct, special or consequential
damages or loss is expressly excluded and denied. In no case shall Graco’s liability exceed the amount of the purchase price. Any
action for breach of warranty must be brought within two (2) years of the date of sale.

EQUIPMENT NOT COVERED BY GRACO WARRANTY

Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose, with
respect to accessories, equipment, fluids, or components sold but not manufactured by Graco. These items sold, but not manufac-
tured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if any, of their manufacturer. Graco will provide
purchaser with reasonable assistance in making any claim for breach of these warranties.

Graco Phone Numbers

TO PLACE AN ORDER, contact your Graco distrib-
utor, or call this number to identify the distributor
closest to you: 1–800–367–4023 Toll Free

FOR TECHNICAL ASSIST

ANCE, service repair

information or assistance regarding the application of
Graco equipment: 1–800–543–0339 Toll Free

Sales Offices: Atlanta, Chicago, Dallas, Detroit, Los Angeles, Mt. Arlington (N.J.)

Foreign Offices: Canada, England, Korea, Switzerland, France, Germany, Hong Kong, Japan

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

PRINTED IN U.S.A.

308–460

 

9/94

Содержание 237-421

















Отзывы: