Graco 234614, Операция

Страница: 26 / 38

Spraying
26 310665E
Spraying
1.
If heaters are used, turn them on. Operate heaters
as instructed in their manual 309524.
6.
Follow Pressure Relief Procedure , page 14.
9.
Follow Fluid Manifold Flushing , page 16, or Shut-
down , page 31, when you are done spraying or
before potlife expires.
2.
Close sampling valves H
A
and H
B
. Open shutoff
valves G
A
and G
B
.
3.
Turn function knob to . Press .
4.
Trigger gun into a pail and slowly increase air regula-
tor pressure until pump is running and consistently
mixed material is dispensed.
G
A
G
B
TI5047a
5.
Engage trigger lock. Press .
7.
Engage trigger lock. Install tip on gun.
8.
Adjust air regulator to the necessary spraying pres-
sure. Press to proportion and spray.
Mixed material potlife or working time
decreases with increased temperature.
TI5049a
TI5176a TI5049a
Bad pattern
Good pattern