Graco 231-323, Инструкция-перечень запасных частей

Страница: 17 / 24

17 308–342
Compressor Repair
9. Remove the screw (17A) from the top cover (11).
See Fig. 17.
10. Remove the screws (17B) and the back cover
(76). See Fig. 17.
11. Remove the screws (17C) and the lower back
cover (13).
12. Disconnect the wires at the compressor motor.
They are located behind the access plate (E).
13. At the compressor, disconnect the end of the tube
(19). Be careful not to bend the tube.
14. Remove the front screws (25) and loosen the rear
screws (27). Pull the compressor (48) forward.
15. Replace the compressor motor in the reverse
order of disassembly. Be sure the silicon sleeve
(53) is in place when securing the tube (19) to the
front of the compressor. Add sealant (93) to the
threads of nut (54). Hold tube (19) securely in
place when tightening nut (54).
NOTE: See the wiring digram on page 20.
005523
Fig. 17
36
43A
76
43B
27
48
53
19
25
19
51
13
E
17C
17C
17B
54
Add sealant (93) to threads
11 17A