14
ACCESSORIES
USE GENUINE GRACO PARTS AND ACCESSORIES
Must be purchased separately.
GROUNDING CLAMP 103-538
GROUND WIRE 208-950
7.6 m (25 ft) long,
1.5 mm
(12 gauge)
BLEED-TYPE MASTER AIR VALVE 107-142
21 bar (300 psi) MAXIMUM WORKING PRESSURE
1/2 npt(m) inlet x 1/2 npt(f) outlet
Relieves air trapped in the air line between the pump air
inlet and this valve when closed. Also used to isolate air
line accessories for servicing.
AIR LINE FILTER 106-149
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
1/2 npt(f) inlet and outlet
AIR LINE LUBRICATOR 214-848
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
0.24 liter (8 oz) bowl capacity.
1/2 npt(f) inlet and outlet.
PUMP RUNAWAY VALVE 215-362
12 bar (180 psi) MAXIMUM WORKING PRESSURE
Shuts off air supply to the pump if the pump accelerates
beyond the pre-adjusted setting due to an empty supply
container, interrupted fluid supply to the pump, or ex-
cessive cavitation. 3/4 npt(f) inlet and outlet
GROUNDED 13 mm (1/2 in.) BUNA-S AIR HOSE
12 bar (175 psi) MAXIMUM WORKING PRESSURE
Part No.
ID
Length
Thd. Size
205–418
13 mm (1/2”)
1.8 m (6 ft)
1/2 npt(m)
205–216
13 mm (1/2”)
4.5 m (15 ft)
1/2 npt(m)
205–273
13 mm (1/2”)
7.6 m (25 ft)
1/2 npt(m)
208–594
13 mm (1/2”)
15.2 m (50 ft)
1/2 npt(m)
FLUID DRAIN VALVE (Carbon Steel)
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
Open to relieve fluid pressure in hose and gun/valve.
210-657
1/4 npt (mbe)
210-658
3/8 npt (mbe)
210-659
1/4 npt x 3/8 npt (mbe)
FLUID REGULATOR 903-958 (Carbon Steel)
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
Regulates fluid pressure to the gun or
dispensing valve, and dampens
pressure surges. Spring operated,
for highly viscous fluids.
3/4 npt(f) inlet, two 3/4 npt(f) outlets.
PTFE FLUID HOSE, with Stainless Steel Braid
and Stainless Steel Couplings
222–934
1/2 npt (m x f); 4.8 m (15 ft) long
276 bar (4000 psi) MAXIMUM WORKING PRESSURE
222–935
1/2 npt (m x f); 4.8 m (15 ft) long
222–936
1/2 npt (m x f); 7.6 m (25 ft) long
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
NYLON FLUID HOSE, with Spring Guards
and Carbon Steel Couplings
184-138
3/4 npt (mbe); 4.8 m (15 ft) long
276 bar (4000 psi) MAXIMUM WORKING PRESSURE
184-139
1/2 npt (mbe); 1.5 m (5 ft) long
184-156
1/2 npt (mbe); 6.1 m (20 ft) long
215-244
3/8 npt (mbe); 7.6 m (25 ft) long
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
GUN SWIVELS (Carbon Steel)
420 bar (6000 psi) MAXIMUM WORKING PRESSURE
To connect the fluid hose to the gun, and allow freer gun
movement. For non-abrasive fluids.
207-947
Straight swivel; 1/2 npt(f) x 1/2 npt(m)
207-948
Zee swivel; 1/2 npt(f) x 1/2 npt(m)
EXTRUSION FLO GUN 207-945 (Carbon Steel)
420 bar (6000 psi) MAXIMUM WORKING PRESSURE
Pistol-type trigger. 1/2 npt(f) inlet.
