Mount
Mount
Mount The
The
The Pump
Pump
Pump
To avoid serious injury from toxic fluid or fumes:
• Ventilate to a remote area. The pump
exhaust air may contain contaminants. See
Air Exhaust Ventilation, page 11
.
• Never move or lift a pump under pressure. If
dropped, the fluid section may rupture. Always
follow the
Pressure Relief Procedure, page 14
before moving or lifting the pump.
1.
Mount the pump so the exhaust port remains
clear of the production area. Exhaust air may
contain debris and condensation from the air
supply and air chamber.
2.
Be sure the mounting surface can support the
weight of the pump, hoses, and accessories, as
well as the stress caused during operation.
3.
For all mountings, be sure the pump is secured
with screws through the mounting feet. Always
mount the pump upright.
4.
Make sure the surface is flat and that the pump
doesn’t wobble.
5.
For ease of operation and service, mount the
pump so air inlet, fluid inlet and fluid outlet ports
are easily accessible.
Accessories/Components
Accessories/Components
Accessories/Components Not
Not
Not Supplied
Supplied
Supplied
System
System
System Components
Components
Components
A
Air supply line
J
Air inlet port
B
Bleed-type master air valve (required
for your pump)
K
Exhaust port and muffler
C
Air filter/regulator assembly
L
Fluid inlet port
D
Master air valve (to isolate the
filter/regulator for service)
M
Fluid outlet port
E
Grounded flexible fluid supply line
N
Mounting feet
F
Fluid drain valve (required for your
pump)
G
Fluid shutoff valve
H
Grounded, flexible fluid outlet line
334792B
9
Springer Pumps, LLC
Telford, PA 18969
Tel: 866-777-6060 / Int'l: 215-949-2900
Fax: 866-777-6383 / Int'l: 215-721-1296
shop.springerpumps.com
