Graco 205435, Инструкция по эксплуатации

Страница: 5 / 16

5 306715
Installation
Grounding
WARNING
FIRE AND EXPLOSION HAZARD
Before operating, ground the system as
explained below. Also read the section
FIRE AND EXPLOSION HAZARD on
page 4.
To reduce the risk of static sparking, ground the pump
and all other components used or located in the dis-
pensing area. Check your local electrical code for
detailed instructions for your area and type of equip-
ment and be sure to ground all of these components.
D
Pump: use a ground wire and clamp as instructed
in your separate pump instruction manual.
D
Air compressors and hydraulic power supplies:
ground according to the manufacturer’s recommen-
dations.
D
Air and fluid hoses: use only electrically conductive
hoses with a maximum of 500 feet (150 m) com-
bined hose length to ensure grounding continuity.
D
Dispensing valve: obtain grounding through con-
nection to a properly grounded fluid hose and
pump.
D
Fluid supply container: according to local code.
D
All solvent pails used when flushing, according to
local code. Use only metal pails, which are conduc-
tive. Do not place the pail on a non-conductive
surface, such as paper or cardboard, which inter-
rupts grounding continuity.