Component Identification
3A5591D
9
Connection Housing
Key:
AA Connection piece, upper
AB Screw ISO 4762 M5 x 20
AC Connection piece, lower
AD Left side cover
AE Screw ISO 7046-1 M3 x 6 Z
AF Pressure transducer (with amplifier)
AG O-ring 10 x 2, 2
AH Connection cable, Solenoid valve
AJ Gasket 1/8”
AK PT 100 sensor (high pressure)
AL Right side cover
AM Female connector 18 pin CPL
AN Screw ISO 4762 M5 x 30
AP Gasket
AQ Nipple
AR Connection flange
AS Upper cover
AT Connector T3
AV Material return
AW Material supply
The connection housing
is designed as the common
platform for all external connections to the applicator.
The connections for material supply (AW) and return
(AV) are placed in the upper connection piece.
The connections are internal 3/8” BSP. One or two con-
nectors for electrical signals are mounted in the bracket
attached to the base module.
The base module may also include a PT100 tempera-
ture sensor (AK) in the material inlet and a pressure
transducer (AF) in the material return channel. When
spraying there is no return flow, the pressure then in the
return line is equal to the pressure just before the nozzle
head.
These sensors and the solenoid valves are connected
to terminals on the pin connector (AM). Note that differ-
ent pin connectors exist depending on applicator ver-
sions i.e. 5 or 18 pins.
F
IG
. 5: Connection Housing
AA
AB
AC
AD
AE
AF
AG
AH
AJ AK
AL
AM
AN
AP
AQ
AR
AS
AT
AV
AW
