Graco 16W119, Операция

Страница: 30 / 32

Technical Data
30 332643B
Technical Data
Project Painter Plus
Working pressure range 0-207 BAR, 0-21 Mpa (0-3000 psi)
Electric Motor 4.5A
(open frame, universal)
Operating horsepower 3/8
Maximum delivery (with tip) .91 lpm (.24 gpm)
Paint hose 6.4mm X 7.5 m (1/4 in. x 25 ft)
Maximum tip hole size 0.015 in (0.38 mm)
Weight, Sprayer only 4.5 kg (10.0 lb)
Weight, Sprayer, Hose, & Gun 6 kg (13.2 lb)
Dimensions (Upright):
Length 35.2 cm (13.8 in)
Width 30.7 cm (17.1 in)
Height 35.1 cm (13.8 in)
Dimensions (Folded):
Length N/A
Width N/A
Height N/A
Power cord 1.0 mm², 3-wire, 1.8 m (6 ft)
Fluid inlet fitting 1/4 npsm external thread
Fluid outlet fitting 3/4 in. internally threaded (standard garden hose)
Inlet screen (on suction tube) 1190 micron (16 mesh)
Wetted parts, pump and hose stainless steel, zinc plated carbon steel, brass, ultra-high molecular weight
polyethylene (UHMWPE), Carbide, Nylon, Aluminum, PVC, polypropylene,
fluroelastomer
Wetted parts, gun aluminum, brass, carbide, nylon, ultra-high molecular weight polyethylene
(UHMWPE), zinc
Generator requirement 1500 Watt minimum
Electrical power requirement 220-240V AC 50/60 Hz, I phase, 10A
Storage temperature range
◆❖
-35° to 71° C (-30° to 160° F)
Operating temperature range
✔
4° to 46° C (40° to 115° F)
◆
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖
Damage to plastic parts may result if impact occurs in low temperature conditions.
✔
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.