background image

Warnings 

4

332156D

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, 

follow the 

Pressure Relief Procedure

 and disconnect all power sources.

SUCTION HAZARD 

Powerful suction could cause serious injury.

Never place hands near the pump fluid inlet when pump is operating or pressurized. 

CARBON MONOXIDE HAZARD

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon 

monoxide can cause death.

Do not operate in an enclosed area.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or 

swallowed.

Read MSDSs to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

BATTERY SAFETY 

The battery may leak, explode, cause burns, or cause an explosion if mishandled.

• Only use the battery type specified for use with the equipment. See 

Technical Data

• Battery maintenance must only be performed or supervised by personnel knowledgeable of 

batteries and the required precautions. Keep unauthorized personnel away from battery. 

• Do not dispose of battery in fire. The battery is capable of exploding. 

• Follow local ordinances and/or regulations for disposal. 

• Do not open or mutilate the battery. Released electrolyte has been known to be harmful to the skin 

and eyes and to be toxic. 

• Remove watches, rings, or other metal objects.

• Only use tools with insulated handles. Do not lay tools or metal parts on top of battery. 

BURN HAZARD 

Equipment surfaces and fluids that are heated can become very hot during operation. To avoid severe 

burns:

Do not touch hot fluid or equipment.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including 

eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is 

not limited to:

Protective eyewear, and hearing protection. 

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

CALIFORNIA PROPOSITION 65 

The engine exhaust from this product contains a chemical known to the State of California to cause 

cancer, birth defects or other reproductive harm.
This product contains a chemical known to the State of California to cause cancer, birth defects or other

reproductive harm. Wash hands after handling.

WARNING

WARNING

WARNING

WARNING

Содержание 16U277

























Отзывы: