Graco 150 RPX Скачать руководство пользователя страница 4

Страница: 4 / 44

309388

The sprayer requires

a 120V AC, 60 Hz, 15A circuit

with grounding receptacle. Never use an outlet that is
not grounded or an adapter.

Do not use the sprayer if the electrical cord has a damaged
ground prong. Only use an extension cord with an undamaged,
3–prong plug.

Recommended extension cords

for use with this sprayer:

25 ft (7.6 m) 18 AWG

50 ft (15.2 m) 16 AWG

100 ft (30.5 m) 14 AWG

150 ft. (45.7 m) 12 AWG

Smaller gauge or longer extension cords may reduce sprayer
performance.

Grounding and Electric Requirements

ti5572a

Ground sprayer gun

through connection to a

properly grounded fluid hose and pump.

Ground fluid supply container.

Follow local code.

The sprayer must be grounded. Grounding reduces the risk of static
and electric shock by providing and escape wire for the electrical
current due to static build up or in the event of a short circuit.

ti3001b

Содержание 150 RPX













































Результаты поиска

Содержание 150 RPX

Отзывы:

Бренды по названию

Популярные бренды

Graco 150 RPX, Руководство по эксплуатации

Результаты поиска

Содержание 150 RPX

Отзывы:

Бренды по названию

Популярные бренды