Graco 103-538, Инструкция-перечень запасных частей

Страница: 9 / 12

307-870 9
Suction Kits
32 Inch Suction Wand Kit 224–761
Includes all items listed below.
Ref.
No.
Part No. Description Qty.
3 224–668 3/16” OD Suction Assembly 1
3a 187–360 .32 In. Wand 1
3b 109–028 .Elbow 1
3c 801–568 .Quick Coupler 1
3d 100–730 .Bushing 1
3 224–669 1/4” OD Suction Assembly 1
3a 187–361 .32 In. Wand 1
3b 109–027 .Elbow 1
3c 801–568 .Quick Coupler 1
3 224–709 3/8” OD Suction Assembly 1
3a 187–362 .32 In. Wand 1
3b 109–004 .Elbow 1
3c 801–568 .Quick Coupler 1
3 224–702 1/2” OD Suction Assembly 1
3a 187–363 .15 In. Wand 1
3b 109–005 .Elbow 1
3c 801–568 .Quick Coupler 1
3 224–703 1/4” OD Suction Assembly 1
3a 187–364 .32 In. Wand
COPPER
1
3b 109–027 .Elbow 1
3c 801–568 .Quick Coupler 1
48 Inch Suction Wand Kit 224–762
Includes all items listed below.
Ref.
No.
Part No. Description Qty.
3 223–459 3/16” OD Suction Assembly
3a 186–087 48 In. Wand 1
3b 109–028 Elbow 1
3c 801–568 Quick Coupler 1
3d 100–730 Bushing 1
3 223–458 1/4” OD Suction Assembly
3a 186–086 48 In. Wand 1
3b 109–027 Elbow 1
3c 801–568 Quick Coupler 1
3 223–457 3/8” OD Suction Assembly
3a 186–085 48 In. Wand 1
3b 109–004 Elbow 1
3c 801–568 Quick Coupler 1
3 223–456 1/2” OD Suction Assembly
3a 186–084 48 In. Wand 1
3b 109–005 Elbow 1
3c 801–568 Quick Coupler 1
Evacuation Control Valve, 220–969
Provides ON/OFF control for both the air supply to the
pump and the suction line from the pump to the evacu-
ation wand using a single hand. A wand storage
bracket is included. The valve is designed for mounting
with Unistrut
r
tubing.
Unistrut
r
is a registered trademark of the Unistrut Corporation.
Installation
1.
Unistrut tubing is recommended for mounting this
valve. Insert capscrews of the appropriate size
through the holes (E) in the valve housing and se-
cure to the Unistrut tubing.
2.
Plumb the main air supply line to A, and the pump
air from B. Plumb the pump fluid inlet line to C.
Connect the suction kit (221–146) at D.
Ref.
No.
Part No. Description Qty.
1 183–447 Block 1
2 108–841 Valve 2
3 183–446 Arm 1
4 167–124 Grip, Hand 1
5 102–410 Capscrew 2
6 167–125 Grip, Hand 1
7 108–840 Pin, Spring 2
8 183–661 Bracket 1
A
B
D
C
8
2
3
6
4
7
03890
5
E
1
1
2
Spring pin located in here
1
Maintain a 0.42 in (10.7 mm)
gap between arm and main
body of valve
2
Fig. 5