Page |
114
GRACE MX II Operating instructions
5.6.
Installing the rear wheel
Urban
Remove the transport safety mechanism.
Carefully place the drive belt onto the belt pulley
on the rear wheel.
Guide the rear wheel axle into the dropout.
Position the rear wheel so that the two torque
arm (key washer) on the left and right on the
outside slide into the dropout. Make sure that
the brake disc slides between the pads.
The rear wheel axle must lie evenly between in the two dropouts and the lugs
of torque arms in the groove .
Attach both axle nut screws and tighten them alternately with a wrench SW15 to 30 Nm.
Also refer to the settings in the torque table.
Please also follow the guidelines for installing the gears in the NuVinci N360
manual
