background image

grace design m801

mk2

owner’s manual

11

Cleaning

Your m801mk2 amplifier chassis is constructed out of high quality aluminum. Under normal cir-
cumstances, virtually no maintenance is required to keep the unit looking shiny and new.  How-
ever, if your unit becomes smudged or dirty, here are some cleaning tips: Apply a small amount 
of windex cleaner to a clean,  dry,  lint free cloth and gently wipe all surfaces, taking care not to 
allow the cleaning product to build up around the panel switches or knobs. 

Warranty Information

The Grace Design EON limited warranty guarantees this product to be free of defective parts and 
workmanship for a period of twenty years. 

•  The Grace Design EON warranty period begins at either 

a)

 the date of original purchase - 

original customer proof of purchase required, or 

b)

 the date the product was originally 

shipped from Grace Design - if original customer proof of purchase is not available.

•  This warranty is transferable to any person who may subsequently purchase the product 

during this time. 

•  This warranty excludes the following conditions: normal wear and tear, misuse, customer 

negligence, accidental damage, unauthorized repair or modification, cosmetic damage and 
damage incurred during shipment. 

•  During the time of this warranty, Grace Design will repair or replace, at its option, any 

defective parts or repair defective workmanship without charge, provided the customer has 
appropriate proof of purchase and that the product has its original factory serial number. 

•  Customers within the US are responsible for all inbound freight charges to Grace Design’s 

facility, while Grace Design will pay for return freight charges via ground service. Customers 
outside the US must contact their distributor for warranty / product return details. 

•  In order for Grace Design to provide efficient and timely warranty service, it is important that 

you mail the completed warranty registration card enclosed with all of our products within 
10 days of the original date of purchase. You may also register your product directly with 
Grace Design by telephone (303-823-8100 Monday-Friday 9:00am to 5:00pm MST), or you can 
register your product online at www.gracedesign.com. 

•  This warranty is in lieu of all other warranties whether written, expressed, or implied, INCLUDING 

ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no 
event will Grace Design be liable for lost profits or any other incidental, consequential or 
Exemplary damages, even if Grace Design is aware of the possibility of such damages.

•  In no event will Grace Design’s liability exceed the purchase price of the product. This 

warranty gives the customer specific legal rights. The customer may also have other rights, 
which vary from state to state. Some states do not allow limitations on implied warranties or 
consequential damages, so some of the limitations of the above may not apply to a particular 
customer.

Содержание m801mk2













Отзывы: