19
Mondo Elite Classic User Guide
Audio Sources
1.
Make sure that your Bluetooth device is turned on and ready to pair. (If you are not
familiar with Bluetooth pairing for your Bluetooth headphones, or other Bluetooth
enabled device, refer to its user guide.)
2.
On the Mondo Elite Classic, press the
Home Button
and turn the
Tune Knob
to highlight
Radio Settings. Press the
Tune Knob
to select.
3.
Turn the
Tune Knob
to highlight Bluetooth and press the
Tune Knob
to select.
4.
The available Bluetooth devices should appear. Turn the
Tune Knob
to highlight the one
with which you wish to pair and press the
Tune Knob
to select.
5.
Press the
Tune Knob
to select Pair BT headphone/speaker. Most headphones will emit a
verbal confirmation or a tone to indicate that pairing was successful.
6.
Press the
Tune Knob
to select Connect to BT headphone/speaker. Once connected, you
will be able to stream your internet radio stations from the Mondo Elite Classic to your
Bluetooth headphones. (The headphones must be paired first, then connected to the
Mondo Elite Classic for this feature to be fully enabled.)
7.
If you wish to pair to a different device, use the
Tune Knob
to navigate to the Bluetooth
folder again and turn the
Tune Knob
to highlight Disconnect. If you wish unpair the
headphones, turn the
Tune Knob
to highlight Unpair.
NOTE:
This feature disables the internal speaker on the Mondo Elite Classic while connected to the Bluetooth
receiving device. Chromecast built-in also does not work. As such, Multi-Room Mode and Bluetooth streaming
from your smartphone or other device are also disabled.
Aux In
You can listen to another device such as an MP3 player or Smartphone by plugging it into the
Aux In connection on the Mondo Elite Classic.
To Listen Using Aux In:
1.
Connect a device to the Aux In connection on the Mondo Elite Classic.
2.
Press
Home
and turn the
Tune Knob
to highlight
Aux In
. Press the
Tune Knob
to select.
To Exit Aux In:
1.
Press the
Stop Button
to exit Aux In.
Playing Music from a USB Thumb Drive
Insert your USB thumb drive into the Mondo Elite Classic and on the radio menu select
Media
Player
then select
USB
.
NOTE:
USB sticks must be formatted in one of the following protocols: FAT, FAT32, NTFS, ext2, ext3 or ext4.
Playing Music from a USB Hard Drive
Connect your USB hard drive to the Mondo Elite Classic. If your drive requires more power,
you may want to use a USB powered hub in between the Mondo Elite Classic and the USB
hard drive, then select ‘Media Player,’ then select ‘USB,’ then you will be able to navigate and
play your music using the
Tune Knob
.
