5
-
Option 1 is to use the digital SPDIF audio out connection on your TV.
This provides the best audio performance. Use the included SPDIF to
3.5mm cable. Connect the SPDIF side of the cable into your TV’s SPDIF
connector. The 3.5mm side of the cable plugs into the connector on the
transmitter marked INPUT. OR
-
Option 2 is to use the analog audio out connection on your TV. This
provides very good audio performance. Use the 3.5mm to 3.5mm cable
provided. Connect either side of the cable into your TV’s audio output
connector and the other side of the cable plugs into the connector on the
transmitter marked INPUT.
Step 3: Using the provided power adapter. Plug the power adapter cable into the
back of the BTTV speaker marked DC IN and the other end into the wall outlet.
The unit is now in standby mode and ready to use.
