Graber | 17
Vertical Blinds: Specialty Shapes: Angled Window Headrail
Options
•
For surcharges, see options pricing
• Ideal for sloping, cathedral-type windows
• Only available in single stack cord control vertical blinds
• Vane stack and cord control must be at the highest point of
the window
• Exact dimensions must accompany orders to ensure proper fit
• Steepest slope possible is 55°
• Maximum size: 144" wide x 144" long (365.8 cm x 365.8 cm),
depending on angle
• Minimum low end is 6" (15.3 cm)
• Available on G71 Super-Vue
®
headrail only
• Square-corner valance with dust cover only; must be mitered at
time of installation
• E-Z Open
™
standard—no charge
• Bottom chains are not available
Width
Left Side
Angle Width
Right Side
Measuring Outside Mount
1. Measure exact width and height of area to be covered.
It is recommended that shades overlap window frame or
opening by 1
1
⁄
2
" (3.9 cm) on each side.
2. Measure height of opening on left side and mark this
dimension “left”. Allow for overlap as desired: 1
1
⁄
2
" (3.9 cm)
on top and bottom is recommended.
3. Measure height of opening on right side and mark this
dimension “right”. Allow for the same overlap as left side.
4. Factory will determine the angle from these three dimensions.
February 2018