8
9
08
10
09
11
1) Using the Allen Key, remove the hanger’s screws (pic 08 & 09).
2) Put the body (A) on the outside of the belt with the opening
turned up. (pic 10)
3) Using the smaller screw (P2), join the superior support insert (B),
regarding the limit of the belt’s edge as shown in the pictures 10
and 11.
2. ADJUSTMENT IN THE BELT
4) Tight up softly the screw
using the Allen Key, just for
the body (A) to be placed not
surpassing the belt’s edge.
(pic 11)
5) Join the inferior regulation
insert (C) to the body (A)
with the bigger screw (P1)
then regulate its position to
adapt to the belt’s width.
After that tight up the screw
softly. (pic 11, 12 & 13)
6) Place the hanger at your
favorite position in the belt.
(pic 13).
7) Finish tightening the screws
P1 & P2 (pic 13).
8) Done! Your Compact Hanger
were regulated successfully!
(pic 14)
A
P1
13
12
C
A
B
C
P1
P2
A
B
C
P1
P2
A
B
C
P1
A
C
A
C
A
C
14
