GR BASS GR 300+, Руководство пользователя

Страница: 8 / 12

8
6. Send
6.35mm jack plug to connect an external effect’s
input
7. DI output
XLR plug
8. Speakon outputs
It is possible to use a 6.35 mm jack. We recommend
to use a 2 poles speakon connector Never use a
6.35 jack guitar cable to connect your amplifier to
your speakers.
9. FAN switch
FAN cooler on and off switch We recommend to
switch off the FAN only at home or in a recording
studio. The failure of the fan’s activation ONLY
determines the heating of the GR300+ case, which
is actually a heat sink. The case increases its own
temperature and decreases the internal electronics.
The failure of the fan’s activation and prolonged
use in extreme weather conditions could activate
the overheating protection system of the GR300+.
In this unlikely case, please activate the fan and
wait few seconds until the amplifier come back to
the normal working status.
10. PRE-POST DI button
Allows you to choose the type of signal to be sent
to the DI output DI: PRE EQ or POST EQ.