CUSTOMER HELPLINE | 1-314-621-2881
GPX | TD1510 11
How do I get my CD or DVD out of the
television?
To eject a disc from the television, press the
Source
Button
and adjust the television to
DVD Mode
,
then press the
Eject Button
on the right side of the
television or on the remote.
How do I reset my television?
Press the
Menu Button
on the top of the television
or on the remote to access the television’s menu.
Press the
TV Navigation Buttons (▲/►/▼/◄/
Enter)
to select the
Setup
page, then scroll down to
Restore Default
and press the
Enter Button
.
Where do I get HDTV antenna information?
The internet is an excellent starting point to get
information on HDTV antenna’s. Just type “HDTV
Antenna” into a search engine (Google, Yahoo,
etc.).
You can also ask a representative at your local
electronics store (Best Buy, RadioShack, etc.).
Why can’t I pick up channels on my NTSC
tuner?
NTSC is an analogue standard which is currently
being phased out as the presence of digital sources
becomes more prevalent. Unfortunately, if you are
experiencing this issue, you must purchase a digital
converter box or upgrade your tuner.
FREQUENTLY ASKED QUESTIONS
Problem
Action
TV will not switch on.
Is the power connected? Insert the power plug.
Press the power button on the remote control.
Screen appears very slowly after the power is
turned on.
This can occur during normal operation as part of the screen illumination
process. If nothing happens after 30 seconds contact GPX.
Screen is too bright or too dark.
Adjust the brightness or contrast in the televisions setup menu.
Picture appears too large or too small on the
screen.
Adjust screen size by pressing the Wide Button on the remote control.
Stripes appear on the screen and it shakes.
Turn off nearby electrical goods.
The screen does not move.
Press the
button. Check if the Pause button is pressed on
external equipment.
Screen appears, but there is no sound.
1. Press the
MUTE
button.
2. If the audio is coming from an external source, check that the cable
is corrected to this device properly.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
Remote control does not work.
1. Check if the mains power is on.
2. Check that the batteries in the remote control were inserted properly.
3. Check to see if any obstacles exist between the LCD TV and the remote
control, remove, if any.
4. If the batteries have no power, replace them with two new batteries.
