Connecting & Playing Media
Using the 3.5mm AV Output
Requires a 3.5mm to 3x RCA audio/video cable
(included).
1. Connect the 3.5mm to 3x RCA audio/video
cable to the AV Output on the unit and the
RCA stereo audio inputs and composite
video input on a television.
2. Audio and video played on the portable DVD
player will now be output to the connected
television.
Remote
MUTE
DISPLAY
SETUP
ENTER
STOP
REPEAT
A-B
SUBTITLE
GOTO
SOURCE
AUDIO
ANGLE
Z
OOM
PROGRAM
1
2
3
4
5
6
7
8
0/10
10
+
9
VOL
VOL
MENU
TITLE
DISPLAY ON/OFF
Remote Battery
Requires two AAA batteries (included).
Connecting a Memory Card
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats
are supported.
Note: Formats are not universally
compatible. Playback may be dependent on recording
conditions.
1. Connect a SD or MMC memory card to the
Memory Card Slot.
2. Press the Source button to enter the DVD/AV
In/MCR/USB menu.
3. Use the Up/Down Arrow and Enter buttons to
select MCR mode and play content from the
connected memory card.
Connecting a USB Thumb Drive
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats
are supported.
1. Connect a USB thumb drive to the USB Port.
2. Press the Source button to enter the DVD/AV
In/MCR/USB menu.
3. Use the Up/Down Arrow and Enter buttons
to select USB mode and play content from the
connected USB thumb drive.
Display ON/OFF
Press to turn the screen ON or OFF.
Title
Press to access title menu for DVD.
Menu
Press to access a DVD’s main menu.
Skip Back/Fwd
Press to skip between chapters or tracks.
Arrows/Enter
Press to make selections
in the on screen or disc menus.
Setup
Press to access the setup menu.
Number Keypad
Enter chapter/title to play.
A-B
Press to create a repeating loop on a
loaded DVD.
Program
Press to program a loaded disc to play
chapters or tracks in a specified order.
Zoom
Press to zoom in or out on a playing DVD.
Source
Press to select DVD/AV In/MCR/
USB.
Subtitle
Toggle subtitles ON or OFF.
Go To
Press and enter a track, chapter,
title or time to skip directly to a
point on the disc.
Rewind/F. Fwd
Press to search through an
individual chapter or track.
/-
Play/Pause
Audio
Press to adjust the current audio
settings for the loaded DVD.
Mute
Press to mute the volume.
Display
Displays current title and menu
information.
Repeat
Press to repeat the current track or
selection.
Angle
On supported DVDs, press and hold
to view alternate angles.
Using the 3.5mm AV Input
Requires a 3.5mm to 3 x RCA audio/video cable
(included).
1. Connect the 3.5mm to 3 x RCA audio/video
cable to the AV Input on the unit and the
composite video outputs on an audio/video
source, such as a TV.
2. Press the Source button to enter the DVD/AV
In/MCR/USB menu.
3. Use the Up/Down Arrow and Enter buttons to
select AV In mode. Audio/video played on the
connected source will now be output to the
portable DVD player.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.gpx.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]
Copyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Loading and Playing a Disc
1. Slide the Open latch to open the Disc Door.
2. Load a disc into the DVD player, label side
facing up. Close the Disc Door. After a disc is
loaded, it will begin playing automatically.
3. If the disc does not begin playing
automatically, press the Play/Pause button.
Programming a Loaded Disc
1. While the loaded disc is playing, press the
Program button on the remote.
2. Use the Arrow buttons to select a program
slot.
3. Use the Number Keypad to enter in the
chapter and title, or track.
4. Titles and chapters, or tracks will play in the
order they are listed.
5. Repeat step 3 until the desired titles and
chapters, or tracks are programmed.
6. Use the Arrow buttons to highlight the on-
screen START button. Press the OK button to
begin playing the programmed disc.
Accessing the Setup Menu
To access the Setup Menu, press the Setup button on
the player or the remote.