Powering the Unit
5
OP
EN
The unit requires AA batteries, not included, or an AC adapter (10V / 60Hz), not
included, to power on.
Playing a CD
1. Slide the
Open Switch
over to open the CD door.
. Load a CD into the unit.
3. After the CD door is closed, the CD should begin playing immediately. If the CD
does not begin playing, press the
Play/Pause Button
to begin playing a loaded
CD.
Programming a CD
1. Slide the
Open Switch
over to open the CD door.
. Load a CD into the unit.
3. After the CD is loaded, press the
Program Button
.
4. Press the
Skip/Search Buttons
to adjust the track number.
5. Press the
Program Button
to set the selected track number as the first
programmed track. Repeat steps 4 and 5 for all subsequent CD tracks.
Up to 20 tracks can be programmed at one time.
6. Press the
Play/Pause Button
to begin playing the programmed CD tracks.