Important Safety Instructions
1.
Read these instructions
. All the safety
and operating instruction should be read
before the product is operated.
2
.
Keep these instructions
. The safety and
operating instructions should be retained for
future reference.
3
.
Heed all warnings
. All warnings on the
product and in the operating instructions
should be adhered to.
4
.
Follow all instructions
. All operating
and use instructions should be followed.
5
.
Water and Moisture:
Do not use this
product near water - for example, near
a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement, or near a
swimming pool, and the like. The apparatus
shall not be exposed to dripping or splashing
and that no objects filled with liquids, such
as vases, shall be placed on apparatus.
6
.
Cleaning
: Clean only with a dry cloth.
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners.
7
.
Ventilation:
Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug, or
other similar surface. This product should
not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
8
.
Heat:
Do not install near any heat
sources such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9
.
Grounding or Polarization:
Do not
defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or
the third prong is provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10
.
Power-Cord Protection:
Protect
the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11
.
Accessories:
Only use attachments/
accessories specified by the manufacturer.
Do not place this product on an unstable
cart, stand. tripod, bracket, or table. The
product may fall causing serious injury to
a child or adult and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions and should use
a mounting accessory recommended by the
manufacturer.
12
. A product and cart combination should
be moved with care. Use only with the cart,
stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13
.
Lightning:
Unplug this apparatus
and disconnect the antenna or cable system
during lightning storms or when unused
for long periods of time. This will prevent
damage to the product due to lightning and
power-line surges.
14
.
Servicing:
Do not attempt to service
this product yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
15
.
Power Sources:
Only connect to
the type of house-hold power supply as
indicated in the operating instructions and
rating label. If you are not sure of the type
of power supply to your home, consult your
product dealer or local power company.
For products intended to operate from
battery power, or other sources, refer to the
operating instruction.
16.
Overloading:
Do not overload wall
outlets or extension cords as this can result
in a risk of fire or electric shock.
17.
Object and Liquid Entry
: Never push
objects of any kind or spill liquid into this
product through openings as this could result
in a risk of fire or electric shock.
18
.
Replacement Parts and Safety
Check
: When replacement parts are
required, be sure the service technician has
used replacement parts specified by the
manufacturer. Ask the service technician
to perform safety checks to ensure proper
operation to avoid possible fire, electric
shock, or other hazards.
19.
Outdoor Antenna Grounding:
If an
outside antenna or cable system is connected
to the product, be sure the antenna or
cable system is grounded so as to provide
some protection against voltage surges and
built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna connection to grounding electrodes,
and requirements for the grounding
electrode.
20.
Wall or Ceiling Mounting:
The
product should be mounted to a wall
or ceiling only as recommended by the
manufacturer.
21
. Where the AC plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
22.
Protective Attachment Plug:
The
product is equipped with an attachment
plug having overload protection. This is
a safety feature. See Instruction Manual
for replacement or resetting of protective
device. If replacement of the plug is
required, be sure the service technician has
used a replacement plug specified by the
manufacturer that has the same overload
protection as the original plug.
23
.
Power
Lines:
An outside antenna
system should not be located in the vicinity
of overhead power lines or other electric
light or power circuits, or where it can fall
into such power lines or circuits. When
installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as
contact with them might be fatal.