Maintenance and Adjustment
•
Pay attention not to make scratches when cleaning the headlight and those plastic parts. Avoid using
high-pressure water spray where seals and electric components are, water seepage can cause damage.
•
Make sure not to spray water to clean the following delicate parts: airbox, ECU, brakes, all electric
connectors, muffler hole, fuel tank cap.
•
First, rinse away the dust and remove dirt with water.
•
Mix the cleaning agent and water to the proportion, use soft clean cloth or sponge to gently rub the
bike.
•
Rince off with soft- or foggy-spray of clean water
•
Wipe with soft cloth to dry and see if all dirt is gone
•
Air blower is not recommended to dry your bike, it may cause flaws to the paint finished
•
Restart the engine at and run idle speed to warm up
•
Ride slowly after washing. Check both brakes by squeezing front and stamping rear brakes several
times to help dry the pads.
34
Содержание Demon 150GR
Страница 11: ...Chassis Number Engine Serial Number 11 ...
Страница 28: ...Brakes Rear Brake Brake Disc If the brake pad had worn to less than 1 mm thick have both as a set changed 28 ...
Страница 43: ...Notes ...
Страница 44: ...Notes ...